remove vcpkg installation added by mistake

1 files changed, 0 insertions, 1029 deletions

diff --git a/vcpkg_installed/vcpkg/blds/sqlite3/src/nf-3530100-fcf7ac0798.clean/Makefile.msc b/vcpkg_installed/vcpkg/blds/sqlite3/src/nf-3530100-fcf7ac0798.clean/Makefile.msc
deleted file mode 100644
index 34e41d8..0000000
--- a/vcpkg_installed/vcpkg/blds/sqlite3/src/nf-3530100-fcf7ac0798.clean/Makefile.msc
+++ /dev/null
@@ -1,1029 +0,0 @@
-#### DO NOT EDIT ####
-# This makefile is automatically generated from the Makefile.msc at
-# the root of the canonical SQLite source tree (not the
-# amalgamation tarball) using the tool/mkmsvcmin.tcl
-# script.
-#
-
-#
-# nmake Makefile for SQLite
-#
-###############################################################################
-############################## START OF OPTIONS ###############################
-###############################################################################
-
-# The toplevel directory of the source tree.  This is the directory
-# that contains this "Makefile.msc".
-#
-TOP = .
-
-
-# Optionally set EXTRA_SRC to a list of C files to append to
-# the generated sqlite3.c. Any sqlite3 extensions added this
-# way may require manual editing, as described in
-# https://sqlite.org/forum/forumpost/903f721f3e7c0d25
-#
-!IFNDEF EXTRA_SRC
-EXTRA_SRC =
-!ENDIF
-
-# Set this non-0 to enable full warnings (-W4, etc) when compiling.
-#
-!IFNDEF USE_FULLWARN
-USE_FULLWARN = 1
-!ENDIF
-
-# Set this non-0 to enable treating warnings as errors (-WX, etc) when
-# compiling.
-#
-!IFNDEF USE_FATAL_WARN
-USE_FATAL_WARN = 0
-!ENDIF
-
-# Set this non-0 to enable full runtime error checks (-RTC1, etc).  This
-# has no effect if (any) optimizations are enabled.
-#
-!IFNDEF USE_RUNTIME_CHECKS
-USE_RUNTIME_CHECKS = 0
-!ENDIF
-
-# Set this non-0 to create a SQLite amalgamation file that excludes the
-# various built-in extensions.
-#
-!IFNDEF MINIMAL_AMALGAMATION
-MINIMAL_AMALGAMATION = 0
-!ENDIF
-
-# Set this non-0 to use "stdcall" calling convention for the core library
-# and shell executable.
-#
-!IFNDEF USE_STDCALL
-USE_STDCALL = 0
-!ENDIF
-
-# Use the USE_SEH=0 option on the nmake command line to omit structured
-# exception handling (SEH) support.  SEH is on by default.
-#
-!IFNDEF USE_SEH
-USE_SEH = 1
-!ENDIF
-
-# Use STATICALLY_LINK_TCL=1 to statically link against TCL
-#
-!IFNDEF STATICALLY_LINK_TCL
-STATICALLY_LINK_TCL = 0
-!ELSEIF $(STATICALLY_LINK_TCL)!=0
-CCOPTS = $(CCOPTS) -DSTATIC_BUILD
-!ENDIF
-
-# Set this non-0 to have the shell executable link against the core dynamic
-# link library.
-#
-!IFNDEF DYNAMIC_SHELL
-DYNAMIC_SHELL = 0
-!ENDIF
-
-# Set this non-0 to enable extra code that attempts to detect misuse of the
-# SQLite API.
-#
-!IFNDEF API_ARMOR
-API_ARMOR = 0
-!ENDIF
-
-# If necessary, create a list of harmless compiler warnings to disable when
-# compiling the various tools.  For the SQLite source code itself, warnings,
-# if any, will be disabled from within it.
-#
-!IFNDEF NO_WARN
-!IF $(USE_FULLWARN)!=0
-NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206
-NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4244 -wd4305 -wd4306 -wd4702 -wd4706
-!ENDIF
-!ENDIF
-
-# Set this non-0 to split the SQLite amalgamation file into chunks to
-# be used for debugging with Visual Studio.
-#
-!IFNDEF SPLIT_AMALGAMATION
-SPLIT_AMALGAMATION = 0
-!ENDIF
-
-
-# Set this non-0 to dynamically link to the MSVC runtime library.
-#
-!IFNDEF USE_CRT_DLL
-USE_CRT_DLL = 0
-!ENDIF
-
-# Set this non-0 to link to the RPCRT4 library.
-#
-!IFNDEF USE_RPCRT4_LIB
-USE_RPCRT4_LIB = 0
-!ENDIF
-
-# Set this non-0 to generate assembly code listings for the source code
-# files.
-#
-!IFNDEF USE_LISTINGS
-USE_LISTINGS = 0
-!ENDIF
-
-# Set this non-0 to attempt setting the native compiler automatically
-# for cross-compiling the command line tools needed during the compilation
-# process.
-#
-!IFNDEF XCOMPILE
-XCOMPILE = 0
-!ENDIF
-
-# Set this non-0 to use the native libraries paths for cross-compiling
-# the command line tools needed during the compilation process.
-#
-!IFNDEF USE_NATIVE_LIBPATHS
-USE_NATIVE_LIBPATHS = 0
-!ENDIF
-
-# Set this 0 to skip the compiling and embedding of version resources.
-#
-!IFNDEF USE_RC
-USE_RC = 1
-!ENDIF
-
-# Set this non-0 to compile binaries suitable for the UWP environment.
-# This setting does not apply to any binaries that require Tcl to operate
-# properly (i.e. the text fixture, etc).
-#
-!IFNDEF FOR_UWP
-FOR_UWP = 0
-!ENDIF
-
-# Set this non-0 to compile binaries suitable for the Windows 10 platform.
-#
-!IFNDEF FOR_WIN10
-FOR_WIN10 = 0
-!ENDIF
-
-
-# Set this to non-0 to create and use PDBs.
-#
-!IFNDEF SYMBOLS
-SYMBOLS = 1
-!ENDIF
-
-# Set this to non-0 to use the SQLite debugging heap subsystem.
-#
-!IFNDEF MEMDEBUG
-MEMDEBUG = 0
-!ENDIF
-
-# Set this to non-0 to use the Win32 native heap subsystem.
-#
-!IFNDEF WIN32HEAP
-WIN32HEAP = 0
-!ENDIF
-
-# Set this to non-0 to enable OSTRACE() macros, which can be useful when
-# debugging.
-#
-!IFNDEF OSTRACE
-OSTRACE = 0
-!ENDIF
-
-# enable address sanitizer using ASAN=1 on the command-line.
-#
-!IFNDEF ASAN
-ASAN = 0
-!ENDIF
-
-# Set this to one of the following values to enable various debugging
-# features.  Each level includes the debugging options from the previous
-# levels.  Currently, the recognized values for DEBUG are:
-#
-# 0 == NDEBUG: Disables assert() and other runtime diagnostics.
-# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API.
-# 2 == Disables NDEBUG and all optimizations and then enables PDBs.
-# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code.
-# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call.
-# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros.
-# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros.
-#
-!IFNDEF DEBUG
-DEBUG = 0
-!ENDIF
-
-
-# Enable use of available compiler optimizations?  Normally, this should be
-# non-zero.  Setting this to zero, thus disabling all compiler optimizations,
-# can be useful for testing.
-#
-!IFNDEF OPTIMIZATIONS
-OPTIMIZATIONS = 2
-!ENDIF
-
-# Set this to non-0 to enable support for the session extension.
-#
-!IFNDEF SESSION
-SESSION = 0
-!ENDIF
-
-# Set this to non-0 to enable support for the rbu extension.
-#
-!IFNDEF RBU
-RBU = 0
-!ENDIF
-
-# Set this to non-0 to enable support for blocking locks.
-#
-!IFNDEF SETLK_TIMEOUT
-SETLK_TIMEOUT = 0
-!ENDIF
-
-# Set the source code file to be used by executables and libraries when
-# they need the amalgamation.
-#
-!IFNDEF SQLITE3C
-!IF $(SPLIT_AMALGAMATION)!=0
-SQLITE3C = sqlite3-all.c
-!ELSE
-SQLITE3C = sqlite3.c
-!ENDIF
-!ENDIF
-
-# Set the include code file to be used by executables and libraries when
-# they need SQLite.
-#
-!IFNDEF SQLITE3H
-SQLITE3H = sqlite3.h
-!ENDIF
-
-# This is the name to use for the SQLite dynamic link library (DLL).
-#
-!IFNDEF SQLITE3DLL
-!IF $(FOR_WIN10)!=0
-SQLITE3DLL = winsqlite3.dll
-!ELSE
-SQLITE3DLL = sqlite3.dll
-!ENDIF
-!ENDIF
-
-# This is the name to use for the SQLite import library (LIB).
-#
-!IFNDEF SQLITE3LIB
-!IF $(FOR_WIN10)!=0
-SQLITE3LIB = winsqlite3.lib
-!ELSE
-SQLITE3LIB = sqlite3.lib
-!ENDIF
-!ENDIF
-
-# This is the name to use for the SQLite shell executable (EXE).
-#
-!IFNDEF SQLITE3EXE
-!IF $(FOR_WIN10)!=0
-SQLITE3EXE = winsqlite3shell.exe
-!ELSE
-SQLITE3EXE = sqlite3.exe
-!ENDIF
-!ENDIF
-
-# This is the argument used to set the program database (PDB) file for the
-# SQLite shell executable (EXE).
-#
-!IFNDEF SQLITE3EXEPDB
-!IF $(FOR_WIN10)!=0
-SQLITE3EXEPDB =
-!ELSE
-SQLITE3EXEPDB = /pdb:sqlite3sh.pdb
-!ENDIF
-!ENDIF
-
-
-# These are the "standard" SQLite compilation options used when compiling for
-# the Windows platform.
-#
-!IFNDEF OPT_FEATURE_FLAGS
-OPT_FEATURE_FLAGS = $(OPT_XTRA)
-!IF $(MINIMAL_AMALGAMATION)==0
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS5=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_BYTECODE_VTAB=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_CARRAY=1
-!ENDIF
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1
-!ENDIF
-
-# Additional feature-options above and beyond what are normally used can be
-# be added using OPTIONS=.... on the command-line.  These values are
-# appended to the OPT_FEATURE_FLAGS variable.
-#
-!IFDEF OPTIONS
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) $(OPTIONS)
-!ENDIF
-
-# Should the session extension be enabled?  If so, add compilation options
-# to enable it.
-#
-!IF $(SESSION)!=0
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1
-!ENDIF
-
-# Always enable math functions on Windows
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_MATH_FUNCTIONS
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PERCENTILE
-
-# Should the rbu extension be enabled?  If so, add compilation options
-# to enable it.
-#
-!IF $(RBU)!=0
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RBU=1
-!ENDIF
-
-# Should structured exception handling (SEH) be enabled for WAL mode in
-# the core library?  It is on by default.  Only omit it if the
-# USE_SEH=0 option is provided on the nmake command-line.
-#
-!IF $(USE_SEH)==0
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_OMIT_SEH=1
-!ENDIF
-
-# These are the "extended" SQLite compilation options used when compiling for
-# the Windows 10 platform.
-#
-!IFNDEF EXT_FEATURE_FLAGS
-!IF $(FOR_WIN10)!=0
-EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1
-EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1
-EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1
-!ELSE
-EXT_FEATURE_FLAGS =
-!ENDIF
-!ENDIF
-
-!IF $(SETLK_TIMEOUT)!=0
-OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SETLK_TIMEOUT
-!ENDIF
-
-###############################################################################
-############################### END OF OPTIONS ################################
-###############################################################################
-
-# When compiling for the Windows 10 platform, the PLATFORM macro must be set
-# to an appropriate value (e.g. x86, x64, arm, arm64, etc).
-#
-!IF $(FOR_WIN10)!=0
-!IFNDEF PLATFORM
-!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.
-!ENDIF
-!ENDIF
-
-# This assumes that MSVC is always installed in 32-bit Program Files directory
-# and sets the variable for use in locating other 32-bit installs accordingly.
-#
-PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..
-PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)
-
-# Check for the predefined command macro CC.  This should point to the compiler
-# binary for the target platform.  If it is not defined, simply define it to
-# the legacy default value 'cl.exe'.
-#
-!IFNDEF CC
-CC = cl.exe
-!ENDIF
-
-# Check for the predefined command macro CSC.  This should point to a working
-# C Sharp compiler binary.  If it is not defined, simply define it to the
-# legacy default value 'csc.exe'.
-#
-!IFNDEF CSC
-CSC = csc.exe
-!ENDIF
-
-# Check for the command macro LD.  This should point to the linker binary for
-# the target platform.  If it is not defined, simply define it to the legacy
-# default value 'link.exe'.
-#
-!IFNDEF LD
-LD = link.exe
-!ENDIF
-
-# Check for the predefined command macro RC.  This should point to the resource
-# compiler binary for the target platform.  If it is not defined, simply define
-# it to the legacy default value 'rc.exe'.
-#
-!IFNDEF RC
-RC = rc.exe
-!ENDIF
-
-# Check for the MSVC runtime library path macro.  Otherwise, this value will
-# default to the 'lib' directory underneath the MSVC installation directory.
-#
-!IFNDEF CRTLIBPATH
-CRTLIBPATH = $(VCINSTALLDIR)\lib
-!ENDIF
-
-CRTLIBPATH = $(CRTLIBPATH:\\=\)
-
-# Check for the command macro NCC.  This should point to the compiler binary
-# for the platform the compilation process is taking place on.  If it is not
-# defined, simply define it to have the same value as the CC macro.  When
-# cross-compiling, it is suggested that this macro be modified via the command
-# line (since nmake itself does not provide a built-in method to guess it).
-# For example, to use the x86 compiler when cross-compiling for x64, a command
-# line similar to the following could be used (all on one line):
-#
-#     nmake /f Makefile.msc sqlite3.dll
-#           XCOMPILE=1 USE_NATIVE_LIBPATHS=1
-#
-# Alternatively, the full path and file name to the compiler binary for the
-# platform the compilation process is taking place may be specified (all on
-# one line):
-#
-#     nmake /f Makefile.msc sqlite3.dll
-#           "NCC=""%VCINSTALLDIR%\bin\cl.exe"""
-#           USE_NATIVE_LIBPATHS=1
-#
-!IFDEF NCC
-NCC = $(NCC:\\=\)
-!ELSEIF $(XCOMPILE)!=0
-NCC = "$(VCINSTALLDIR)\bin\$(CC)"
-NCC = $(NCC:\\=\)
-!ELSE
-NCC = $(CC)
-!ENDIF
-
-# Check for the MSVC native runtime library path macro.  Otherwise,
-# this value will default to the 'lib' directory underneath the MSVC
-# installation directory.
-#
-!IFNDEF NCRTLIBPATH
-NCRTLIBPATH = $(VCINSTALLDIR)\lib
-!ENDIF
-
-NCRTLIBPATH = $(NCRTLIBPATH:\\=\)
-
-# Check for the Platform SDK library path macro.  Otherwise, this
-# value will default to the 'lib' directory underneath the Windows
-# SDK installation directory (the environment variable used appears
-# to be available when using Visual C++ 2008 or later via the
-# command line).
-#
-!IFNDEF NSDKLIBPATH
-NSDKLIBPATH = $(WINDOWSSDKDIR)\lib
-!ENDIF
-
-NSDKLIBPATH = $(NSDKLIBPATH:\\=\)
-
-# Check for the UCRT library path macro.  Otherwise, this value will
-# default to the version-specific, platform-specific 'lib' directory
-# underneath the Windows SDK installation directory.
-#
-!IFNDEF UCRTLIBPATH
-UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)
-!ENDIF
-
-UCRTLIBPATH = $(UCRTLIBPATH:\\=\)
-
-# C compiler and options for use in building executables that
-# will run on the platform that is doing the build.
-#
-!IF $(USE_FULLWARN)!=0
-BCC = $(NCC) -nologo -W4 -Fd$*.pdb $(CCOPTS) $(BCCOPTS)
-!ELSE
-BCC = $(NCC) -nologo -W3 -Fd$*.pdb $(CCOPTS) $(BCCOPTS)
-!ENDIF
-
-# Check if assembly code listings should be generated for the source
-# code files to be compiled.
-#
-!IF $(USE_LISTINGS)!=0
-BCC = $(BCC) -FAcs
-!ENDIF
-
-# Check if the native library paths should be used when compiling
-# the command line tools used during the compilation process.  If
-# so, set the necessary macro now.
-#
-!IF $(USE_NATIVE_LIBPATHS)!=0
-NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"
-
-!IFDEF NUCRTLIBPATH
-NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\)
-NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)"
-!ENDIF
-!ENDIF
-
-# C compiler and options for use in building executables that
-# will run on the target platform.  (BCC and TCC are usually the
-# same unless your are cross-compiling.)
-#
-!IF $(USE_FULLWARN)!=0
-TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS)
-!ELSE
-TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS)
-!ENDIF
-
-# Check if warnings should be treated as errors when compiling.
-#
-!IF $(USE_FATAL_WARN)!=0
-TCC = $(TCC) -WX
-!ENDIF
-
-TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -fp:precise
-RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) $(RCOPTS) $(RCCOPTS)
-
-# Check if we want to use the "stdcall" calling convention when compiling.
-# This is not supported by the compilers for non-x86 platforms.  It should
-# also be noted here that building any target with these "stdcall" options
-# will most likely fail if the Tcl library is also required.  This is due
-# to how the Tcl library functions are declared and exported (i.e. without
-# an explicit calling convention, which results in "cdecl").
-#
-!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
-!IF "$(PLATFORM)"=="x86"
-CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
-SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
-
-
-!ELSE
-!IFNDEF PLATFORM
-CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
-SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
-
-
-!ELSE
-CORE_CCONV_OPTS =
-SHELL_CCONV_OPTS =
-!ENDIF
-!ENDIF
-!ELSE
-CORE_CCONV_OPTS =
-SHELL_CCONV_OPTS =
-!ENDIF
-
-# These are additional compiler options used for the core library.
-#
-!IFNDEF CORE_COMPILE_OPTS
-!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
-CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
-!ELSE
-CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
-!ENDIF
-!ENDIF
-
-# These are the additional targets that the core library should depend on
-# when linking.
-#
-!IFNDEF CORE_LINK_DEP
-!IF $(DYNAMIC_SHELL)!=0
-CORE_LINK_DEP =
-!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
-CORE_LINK_DEP = sqlite3.def
-!ELSE
-CORE_LINK_DEP =
-!ENDIF
-!ENDIF
-
-# These are additional linker options used for the core library.
-#
-!IFNDEF CORE_LINK_OPTS
-!IF $(DYNAMIC_SHELL)!=0
-CORE_LINK_OPTS =
-!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
-CORE_LINK_OPTS = /DEF:sqlite3.def
-!ELSE
-CORE_LINK_OPTS =
-!ENDIF
-!ENDIF
-
-# These are additional compiler options used for the shell executable.
-#
-!IFNDEF SHELL_COMPILE_OPTS
-!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
-SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
-!ELSE
-SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
-!ENDIF
-!ENDIF
-
-# This is the source code that the shell executable should be compiled
-# with.
-#
-!IFNDEF SHELL_CORE_SRC
-!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
-SHELL_CORE_SRC =
-!ELSE
-SHELL_CORE_SRC = $(SQLITE3C)
-!ENDIF
-!ENDIF
-
-# This is the core library that the shell executable should depend on.
-#
-!IFNDEF SHELL_CORE_DEP
-!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
-SHELL_CORE_DEP = $(SQLITE3DLL)
-!ELSE
-SHELL_CORE_DEP =
-!ENDIF
-!ENDIF
-
-
-# This is the core library that the shell executable should link with.
-#
-!IFNDEF SHELL_CORE_LIB
-!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
-SHELL_CORE_LIB = $(SQLITE3LIB)
-!ELSE
-SHELL_CORE_LIB =
-!ENDIF
-!ENDIF
-
-# These are additional linker options used for the shell executable.
-#
-!IFNDEF SHELL_LINK_OPTS
-SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
-!ENDIF
-
-# Check if assembly code listings should be generated for the source
-# code files to be compiled.
-#
-!IF $(USE_LISTINGS)!=0
-TCC = $(TCC) -FAcs
-!ENDIF
-
-# C compiler options for the Windows 10 platform (needs MSVC 2015).
-#
-!IF $(FOR_WIN10)!=0
-TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
-BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
-!ENDIF
-
-# Also, we need to dynamically link to the correct MSVC runtime
-# when compiling for WinRT (e.g. debug or release) OR if the
-# USE_CRT_DLL option is set to force dynamically linking to the
-# MSVC runtime library.
-#
-!IF $(USE_CRT_DLL)!=0
-!IF $(DEBUG)>1
-TCC = $(TCC) -MDd
-BCC = $(BCC) -MDd
-ZLIBCFLAGS = -nologo -MDd -W3 -O2 -Oy- -Zi
-!ELSE
-TCC = $(TCC) -MD
-BCC = $(BCC) -MD
-ZLIBCFLAGS = -nologo -MD -W3 -O2 -Oy- -Zi
-!ENDIF
-!ELSE
-!IF $(DEBUG)>1
-TCC = $(TCC) -MTd
-BCC = $(BCC) -MTd
-ZLIBCFLAGS = -nologo -MTd -W3 -O2 -Oy- -Zi
-!ELSE
-TCC = $(TCC) -MT
-BCC = $(BCC) -MT
-ZLIBCFLAGS = -nologo -MT -W3 -O2 -Oy- -Zi
-!ENDIF
-!ENDIF
-
-
-!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0
-TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1
-RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1
-!ENDIF
-
-!IF $(DEBUG)>2
-TCC = $(TCC) -DSQLITE_DEBUG=1 -DSQLITE_USE_W32_FOR_CONSOLE_IO
-RCC = $(RCC) -DSQLITE_DEBUG=1
-!IF $(DYNAMIC_SHELL)==0
-TCC = $(TCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
-RCC = $(RCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
-!ENDIF
-!ENDIF
-
-!IF $(DEBUG)>4 || $(OSTRACE)!=0
-TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
-RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
-!ENDIF
-
-!IF $(DEBUG)>5
-TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1
-RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1
-!ENDIF
-
-# Prevent warnings about "insecure" MSVC runtime library functions
-# being used.
-#
-TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
-BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
-RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
-
-# Prevent warnings about "deprecated" POSIX functions being used.
-#
-TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
-BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
-RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
-
-# Use the SQLite debugging heap subsystem?
-#
-!IF $(MEMDEBUG)!=0
-TCC = $(TCC) -DSQLITE_MEMDEBUG=1
-RCC = $(RCC) -DSQLITE_MEMDEBUG=1
-
-# Use native Win32 heap subsystem instead of malloc/free?
-#
-!ELSEIF $(WIN32HEAP)!=0
-TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1
-RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1
-
-# Validate the heap on every call into the native Win32 heap subsystem?
-#
-!IF $(DEBUG)>3
-TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
-RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
-!ENDIF
-!ENDIF
-
-
-# Address sanitizer if ASAN=1
-#
-!IF $(ASAN)>0
-TCC = $(TCC) /fsanitize=address
-!ENDIF
-
-
-# Compiler options needed for programs that use the readline() library.
-#
-!IFNDEF READLINE_FLAGS
-READLINE_FLAGS = -DHAVE_READLINE=0
-!ENDIF
-
-# The library that programs using readline() must link against.
-#
-!IFNDEF LIBREADLINE
-LIBREADLINE =
-!ENDIF
-
-# Should the database engine be compiled threadsafe
-#
-TCC = $(TCC) -DSQLITE_THREADSAFE=1
-RCC = $(RCC) -DSQLITE_THREADSAFE=1
-
-# Do threads override each others locks by default (1), or do we test (-1)
-#
-TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
-RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
-
-# Any target libraries which libsqlite must be linked against
-#
-!IFNDEF TLIBS
-TLIBS =
-!ENDIF
-
-# Enable/disable loadable extensions, and other optional features
-# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*).
-# The same set of OMIT and ENABLE flags should be passed to the
-# LEMON parser generator and the mkkeywordhash tool as well.
-
-# These are the required SQLite compilation options used when compiling for
-# the Windows platform.
-#
-REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100
-
-# If we are linking to the RPCRT4 library, enable features that need it.
-#
-!IF $(USE_RPCRT4_LIB)!=0
-REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1
-!ENDIF
-
-# Add the required and optional SQLite compilation options into the command
-# lines used to invoke the MSVC code and resource compilers.
-#
-TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
-RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
-
-# Add in any optional parameters specified on the commane line, e.g.
-# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1"
-#
-TCC = $(TCC) $(OPTS)
-RCC = $(RCC) $(OPTS)
-
-# If compiling for debugging, add some defines.
-#
-!IF $(DEBUG)>1
-TCC = $(TCC) -D_DEBUG
-BCC = $(BCC) -D_DEBUG
-RCC = $(RCC) -D_DEBUG
-!ENDIF
-
-# If optimizations are enabled or disabled (either implicitly or
-# explicitly), add the necessary flags.
-#
-!IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0
-TCC = $(TCC) -Od
-BCC = $(BCC) -Od
-!IF $(USE_RUNTIME_CHECKS)!=0
-TCC = $(TCC) -RTC1
-BCC = $(BCC) -RTC1
-!ENDIF
-!ELSEIF $(OPTIMIZATIONS)>=3
-TCC = $(TCC) -Ox
-BCC = $(BCC) -Ox
-!ELSEIF $(OPTIMIZATIONS)==2
-TCC = $(TCC) -O2
-BCC = $(BCC) -O2
-!ELSEIF $(OPTIMIZATIONS)==1
-TCC = $(TCC) -O1
-BCC = $(BCC) -O1
-!ENDIF
-
-# If symbols are enabled (or compiling for debugging), enable PDBs.
-#
-!IF $(DEBUG)>1 || $(SYMBOLS)!=0
-TCC = $(TCC) -Zi
-BCC = $(BCC) -Zi
-!ENDIF
-
-
-# Command line prefixes for compiling code, compiling resources,
-# linking, etc.
-#
-LTCOMPILE = $(TCC) -Fo$@ -Fd$*.pdb
-LTRCOMPILE = $(RCC) -r
-LTLIB = lib.exe
-LTLINK = $(TCC) -Fe$@
-
-# If requested, link to the RPCRT4 library.
-#
-!IF $(USE_RPCRT4_LIB)!=0
-LTLIBS = $(LTLIBS) rpcrt4.lib
-!ENDIF
-
-# If a platform was set, force the linker to target that.
-# Note that the vcvars*.bat family of batch files typically
-# set this for you.  Otherwise, the linker will attempt
-# to deduce the binary type based on the object files.
-!IFDEF PLATFORM
-LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM)
-LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM)
-!ELSEIF "$(VISUALSTUDIOVERSION)"=="12.0" || \
-        "$(VISUALSTUDIOVERSION)"=="14.0" || \
-        "$(VISUALSTUDIOVERSION)"=="15.0"
-LTLINKOPTS = /NOLOGO /MACHINE:x86
-LTLIBOPTS = /NOLOGO /MACHINE:x86
-!ELSE
-LTLINKOPTS = /NOLOGO
-LTLIBOPTS = /NOLOGO
-!ENDIF
-
-# When compiling for UWP or the Windows 10 platform, some extra linker
-# options are also required.
-#
-!IF $(FOR_UWP)!=0 || $(FOR_WIN10)!=0
-LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib
-LTLINKOPTS = $(LTLINKOPTS) mincore.lib
-!IFDEF PSDKLIBPATH
-LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)"
-!ENDIF
-!ENDIF
-
-!IF $(FOR_WIN10)!=0
-LTLINKOPTS = $(LTLINKOPTS) /guard:cf "/LIBPATH:$(UCRTLIBPATH)"
-!IF $(DEBUG)>1
-LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib
-!ELSE
-LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib
-!ENDIF
-!ENDIF
-
-# If either debugging or symbols are enabled, enable PDBs.
-#
-!IF $(DEBUG)>1 || $(SYMBOLS)!=0
-LDFLAGS = /NODEFAULTLIB:msvcrt /DEBUG $(LDOPTS)
-!ELSE
-LDFLAGS = /NODEFAULTLIB:msvcrt $(LDOPTS)
-!ENDIF
-
-
-# You should not have to change anything below this line
-###############################################################################
-
-
-# Object files for the amalgamation.
-#
-LIBOBJS1 = sqlite3.lo
-
-# Determine the real value of LIBOBJ based on the 'configure' script
-#
-LIBOBJ = $(LIBOBJS1)
-
-# Determine if embedded resource compilation and usage are enabled.
-#
-!IF $(USE_RC)!=0
-LIBRESOBJS = sqlite3res.lo
-!ELSE
-LIBRESOBJS =
-!ENDIF
-
-
-# Additional compiler options for the shell.  These are only effective
-# when the shell is not being dynamically linked.
-#
-!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_DQS=0
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_FTS4=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_PERCENTILE=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_UNKNOWN_SQL_FUNCTION=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_STMT_SCANSTATUS=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB=1
-SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_STRICT_SUBTYPE=1
-!ENDIF
-
-
-# This is the default Makefile target.  The objects listed here
-# are what get build when you type just "make" with no arguments.
-#
-core:	dll shell
-
-# Targets that require the Tcl library.
-#
-tcl:	$(ALL_TCL_TARGETS)
-
-# This Makefile target builds all of the standard binaries.
-#
-all:	core tcl
-
-# Dynamic link library section.
-#
-dll:	$(SQLITE3DLL)
-
-# Shell executable.
-#
-shell:	$(SQLITE3EXE)
-
-# jimsh0 - replacement for tclsh
-#
-jimsh0.exe:	$(TOP)\autosetup\jimsh0.c
-	cl -DHAVE__FULLPATH=1 $(TOP)\autosetup\jimsh0.c
-
-
-$(SQLITE3DLL):	$(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
-	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
-
-Replace.exe:
-	$(CSC) /target:exe $(TOP)\Replace.cs
-
-sqlite3.def:	Replace.exe $(LIBOBJ)
-	echo EXPORTS > sqlite3.def
-	dumpbin /all $(LIBOBJ) \
-		| .\Replace.exe "^\s+/EXPORT:_?(sqlite3(?:session|changeset|changegroup|rebaser|rbu)?_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \
-		| sort >> sqlite3.def
-
-$(SQLITE3EXE):	shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H)
-	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) shell.c $(SHELL_CORE_SRC) \
-		/link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)
-
-
-tclsqlite-ex.c:
-
-# Rule to build the amalgamation
-#
-sqlite3.lo:	$(SQLITE3C)
-	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)
-
-
-# Rule to build the Win32 resources object file.
-#
-!IF $(USE_RC)!=0
-_HASHCHAR=^#
-!IF ![echo !IFNDEF VERSION > rcver.vc] && \
-    ![for /F "delims=" %V in ('type "$(SQLITE3H)" ^| "%SystemRoot%\System32\find.exe" "$(_HASHCHAR)define SQLITE_VERSION "') do (echo VERSION = ^^%V >> rcver.vc)] && \
-    ![echo !ENDIF >> rcver.vc]
-!INCLUDE rcver.vc
-!ENDIF
-
-RESOURCE_VERSION = $(VERSION:^#=)
-RESOURCE_VERSION = $(RESOURCE_VERSION:define=)
-RESOURCE_VERSION = $(RESOURCE_VERSION:SQLITE_VERSION=)
-RESOURCE_VERSION = $(RESOURCE_VERSION:"=)
-RESOURCE_VERSION = $(RESOURCE_VERSION:.=,)
-
-$(LIBRESOBJS):	$(TOP)\sqlite3.rc rcver.vc $(SQLITE3H)
-	echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h
-	echo #define SQLITE_RESOURCE_VERSION $(RESOURCE_VERSION) >> sqlite3rc.h
-	echo #endif >> sqlite3rc.h
-	$(LTRCOMPILE) -fo $(LIBRESOBJS) -DRC_VERONLY $(TOP)\sqlite3.rc
-!ENDIF
-
-
-clean:
-	del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL
-	del /Q *.bsc *.cod *.da *.bb *.bbg *.vc gmon.out 2>NUL
-	del /Q sqlite3.def tclsqlite3.def ctime.c pragma.h 2>NUL
-	del /Q $(SQLITE3EXE) $(SQLITE3DLL) Replace.exe 2>NUL